Rotary dryer requirements for the site

The site requires an area of ​​not less than 100 square meters for the workshop where the equipment is placed. House lifting racks must be higher than three meters, preferably up to 3.5 meters, because no matter whether it is drying or molding, there will be some smoke in the workshop during the whole production process. People will feel uncomfortable after staying for a long time. Lifting a house can improve the working environment of workers. There are also certain benefits to fire protection. The warehouse is mainly used for storing finished products. There are not many requirements, and there is no fire hazard. For outdoor use, there must be enough space for stacking raw materials, and there must be a site for kiln construction and kiln work, and roughly calculate at least 500 flat. Another important point is the emission of smoke. It is best to choose a place where people are away from the crowd, so the pressure on environmental protection will be smaller. Also avoid affecting the lives of the surrounding residents.

       Shuliy Machinery Manufacturing Co., Ltd. is a charcoal machine enterprise integrating scientific research, production and marketing. The main products are: charcoal machine, continuous carbonization furnace, raw material dryer, carbon powder rod machine, pulverizer, wood chip machine, wood chip vibrating screen, carbon powder forming machine, air gas carbonization furnace, coal rod machine, straw coal molding Machine, sawdust briquetting machine, straw fuel forming machine, carbon powder ball press, tablet press, double-stage crusher, Nissan 30-300 cubic foam concrete production line host. Our factory has a first-class talent team, high-quality follow-up after-sales service, adhere to the "quality first, customer first, and strive for a win-win" service purposes, with "integrity-based, technological innovation, reputation first, service first" concept Quality, credibility, strict management, science, service, and first-class are our consistent goals, implement profit sharing, win-win marketing strategies with customers, implement new development strategies, and build with the times. The sense of quality.

How to operate the carbon powder molding machine correctly

How to properly operate the charcoal briquetting machine (carbon powder forming machine) is the key to the machine and the finished product. We must pay attention to several aspects when operating the charcoal briquetting machine, in order to make the quality of the carbon rod better and the output higher. The price is also far beyond the general mechanism carbon price.

        1. The surface is cracked. If the raw material moisture is too large, it will easily cause transverse cracks on the rod during production. When the water goes to Europe, it will cause longitudinal cracks. In addition, if the heating temperature is too high, the raw material is excessively softened, thereby causing insufficient supply. This can also lead to cracks. Generally, the problem of insufficient supply is to increase the diameter of the spiral or to polish the spiral wall and increase the span between the spirals.

        2. The density at the center of the rod is small or contains scattered sawdust. This is because the diameter of the root of the tip of the propeller of the carbon powder molding machine is not thickened by welding. Misalignment of the shaft tip can also cause the above problems, which need to be corrected at high temperatures.

        3. The ups and downs show the gas ejected from the feed opening in the production, mainly due to insufficient supply, and may also be due to excessive moisture in the raw materials and insufficient heating temperature.

        4, "smuggling car" raw materials mixed with large particles and hard impurities, or heating temperature is low. The former needs to be shut down for disassembly to remove impurities. Or continue to heat and soften the raw materials.

        There are also many safety hazards in the molding process. First of all, the body of the carbon powder molding machine mainly has a steel material with good electrical conductivity. Therefore, it is best to install a leakage switch at the power supply.